(how to use) To use the tool you need to have an object that represents the eye center, the eye joint is great to use. The tool also requires an upper lid curve and a lower lid curve that represents the border of each one. To create the curves start by selecting the edges of your upper lid border and go into the "Edit Curve" menu in the tool and select "Create From Selection". Do the same thing for the lower lid curve and be careful not to select the edges that represent the upper lid, the upper lid curve will show in pink when in edge selection mode. When both curves are created rename them and check the direction of the curve. IMPORTANT: The curve direction needs to be from the inner corner of the eye to the outer. To check the direction of the curves, select the curves and go in to component mode, the start of the curve has a little "u" as the second vertex to indicate the direction. If the direction is wrong, select the curve and from the "Edit Curve" menu in the tool select "Reverse Direction". Load the eye center object and the curves to the tool text fields and hit "Build Eye Rig" If everything went as it supposed to, you should have an eye rig created :) The joints that you skin to the mesh are located in the "lid_parentToHeadGrp" >> "lidSkinJntsGrp" >> "uplidJntGrp" and "lolidJntGrp". The skin joints are post-fixed with "_s" they can be found as child joints to the base joints with "_jnt" as post-fix. Select all the base joints and press the down arrow once on your keyboard for easy selection. Add the selected joints to your skinned mesh. There will be one skinned joint for each vertex on the lid border.